阿弥陀佛，ATI终于还是没有怀孕

溺水的鱼

虽然来得晚了一点，但终归是没有怀孕

可怜我用X850XT跑模拟飞行10卡得不行，天天去她的网站看，天天担心中标

可是终于来了，看看更新说明把

New Product Software Driver Support
This release of Catalyst® will provide software support for the following new ATI products:

ATI Radeon® X1650 Pro
ATI Radeon® 1950 XTX
ATI Radeon® X1300 XT

HDR + Anti-Aliasing support for The Elder Scrolls Oblivion
Users no longer need to download and install the Chuck patch - the Direct3D driver now includes native support for High Dynamic Range and Anti-Aliasing with The Elder Scrolls Oblivion.

Performance Improvement
As with most Catalyst® releases, performance has increased in various situations. In this release of Catalyst® Intel 965 Crossfire performance increases due to improvements of the Crossfire D3D driver in handling large vertex meshes. Gains of 6.7-15.8% can be seen in 3DMark2006, 9.7-10.5% in 3DMark2005 and 3DMark2003 performance improves as much as 7.1%.

Issues Resolved in Catalyst® Software Suite 6.10
The following section provides a summary of the issues that are resolved in the latest release of Catalyst®. These include:

3DMark2006: Setting the display resolution to 1600x1200 and AA to either 4x or 6x no longer results in display corruption being noticed when running the HDR1 test. This issue was known to occur on certain specific systems only. Further details can be found in topic number 737-23443

Anarchy-Online: Screen corruption is no longer noticed when walking or running through the terrain. Further details can be found in topic number 737-22016

Black & White 2: Battle of the Gods: Intermittent display corruption is no longer noticed when playing the game in a system containing an ATI Radeon® X1900 series and running the Windows MCE operating system when setting the graphics options within the game to high details. Further details can be found in topic number 737-23275

Commandos Strike Force: Enabling CrossFire™ and playing the game no longer results in display corruption being noticed when using an Intel 965 motherboard. Further details can be found in topic number 737-23444

Godfather: Task switching between the game and the windows desktop no longer results in display corruption being noticed when playing the game at a display resolution of 1600x1200 (or higher) when having the in-game video options set to optimal quality. Further details can be found in topic number 737-23440

Serious Sam 2: Playing the game on a system running the Windows MCE operating system and containing an ATI Radeon X1800 CrossFire™ Edition product no longer results in the operating system rebooting after approximately 20 minutes of game play when playing the game in a high setting windowed mode. Further details can be found in topic number 737-23445
World of Warcraft: Playing the game for an extended period of time no longer results in the game failing to respond when using a Radeon® X800. Further details can be found in topic number 737-22632

Catalyst® Control Center: Setting new clock values no longer results in the confirm changes dialog box failing to be displayed and clicking on cancel option may result in the new values still being applied. Further details can be found in topic number 737-23278

Setting the display properties to prompt for a restart of the system when making a display resolution change, no longer results in the selected display resolution not being applied when clicking yes to restart the computer for the changes to take effect. Further details can be found in topic number 737-23279

Connecting a CRT to a system containing an ATI Xpress 1150 series product followed by enabling extended desktop mode, no longer results in the both the LCD and the CRT failing to resume when attempting to resume from a standby state. Further details can be found in topic number 737-23434

The LCD Panel Setting no longer becomes Use centered timings when resuming from suspend mode. Further details can be found in topic number 737-23435

Display corruption is no longer noticed when switching between normal screen and full screen mode when viewing either a video or a picture slide show under the Windows Media Center Edition operating system using the Media Center application. Further details can be found in topic number 737-23436

Installing the Catalyst® software driver on a system running the Windows XP Japanese version operating system no longer results in the .NET Framework version requirement dialog box being displayed in English. Further details can be found in topic number 737-23253

Setting the display resolution to 1400x1080 on a system running the Windows XP operating system and containing an ATI Xpress 200 series product, no longer results in the display appearing jagged. Further details can be found in topic number 737-23437

Playing a DVD using WinDVD no longer results in display corruption being noticed within the player when resizing the player window. Further details can be found in topic number 737-23256

The ATI VPU Recover functionality no longer fails when using an ATI Radeon® X1900 series of products. Further details can be found in topic number 737-23438

Catalyst® Control Center: Clicking the Enable ATI Overdrive clocks for 3D application only button followed by selecting the Preserve ATI Overdrive Settings at log on no longer results in a VPU recover event occurring when running the Automated Clock Configuration Utility. Further details can be found in topic number 737-23439

CrossFire™: Enabling Wait for Vsync within the Catalyst® Control Center no longer results in display corruption being noticed within the 3D->Anti-aliasing aspect page when setting the pre-view to full-screen. Further details can be found in topic number 737-23441

Catalyst® Control Center: Connecting a CRT and a TV to an ATI Radeon® X800 series of products no longer results in the display mode for the CRT being incorrect when selecting to swap the display devices and then cancelling the selection. Further details can be found in topic number 737-23442

Known Issues for Catalyst® Software Suite 6.10

Battlefield 2: Attempting to launch the game under Windows XP with the in-game display setting at 1920x1440 or 2048x1536 and AA set to 6x may result in the game failing to launch. Further details can be found in topic number 737-22817

Sniper Elite: Playing the game under Windows XP with an ATI Radeon® X1600 series installed may result in texture corruption being noticed. Further details can be found in topic number 737-22820

Tomb Raider Legend: Enabling CrossFire may result in slower performance being noticed. Further details can be found in topic number 737-23448

Enabling CrossFire™ may result in display corruption being noticed when playing a DVD or media clip using either WinDVD 7, Windows Media Player or PowerDVD 6. Further details can be found in topic number 737-22806

Playing a DVD and switching from AC power to battery power on systems containing an ATI Radeon® Xpress 1150 may result in playback lag being noticed. Further details can be found in topic number 737-23276

Plugging a TV into s-video out connector, followed by entering to display manager and clicking detect displays may result in the TV failing to be detected. Further information can be found in topic number 737-23008

Using the ATI Uninstall Utility to remove the display driver or Catalyst® Control Center may result in portions of third party applications also being uninstalled. Further details can be found in topic number 737-23277

Connecting two display devices on a system running the Windows MCE operating system and enabling extended desktop mode may result in display corruption being noticed when dragging and placing a window between the two display devices. Further details can be found in topic number 737-23280

The Catalyst® Control Center version number may differ between the Catalyst® Control Center Software Information Center and the version number listed in the Add/Remove programs. Further details can be found in topic number 737-23281

Catalyst® Control Center->Basic View: Connecting a secondary display device and attempting to enable it, may result in the inability to enable the device when using Basic view. Further details can be found in topic number 737-23446

Playing a DVD and switching from AC power to battery power on systems containing an ATI Radeon® Xpress 1150 may result in playback lag being noticed. Further details can be found in topic number noticed - 737-23276

Intermittent display issues may be noticed when using an Apple Cinema HD 30" display device. Contact ATI Customer Care for a solution. ATI Engineering is aware of the issue and a resolve will be available in an up-coming software driver release. Further details can be found in topic number

During video playback, DirectX Video Acceleration (DXVA) may not be available when CrossFire mode is enabled. This will result in software mode video playback. To enable DXVA CrossFire mode must be disabled. Further details can be found in topic number 737-23447

下载地址

https://support.ati.com/ics/supp ... dge&folderID=27

XYZXYZ

你的判断的依据及其不科学，怀孕的当月也有可能来MC的。只是各例不多，量也不多。

尖石头

老是拿女性的生理期来比喻官方的驱动程式....现在又来个怀孕!
感觉楼主这类人好自以为是..给人一种很不尊重女性的感觉@@
我是男性也觉的有点过份==

jpbird

随便翻译几条解决的问题：3DMark2006: Setting the display resolution to 1600x1200 and AA to either 4x or 6x no longer results in display corruption being noticed when running the HDR1 test. This issue was known to occur on certain specific systems only. Further details can be found in topic number 737-23443
:解决在06的HDR1测试时分辨率设定为1600x1200，开4X或6X AA时黑屏 。此问题已知是在特定平台才出现。

The ATI VPU Recover functionality no longer fails when using an ATI Radeon® X1900 series of products.：VPU恢复功能在X1900 系列上使用不再失效。

Catalyst® Control Center: Clicking the Enable ATI Overdrive clocks for 3D application only button followed by selecting the Preserve ATI Overdrive Settings at log on no longer results in a VPU recover event occurring when running the Automated Clock Configuration Utility：CCC，在使用自动超频功能时，点击Enable ATI Overdrive clocks for 3D application only 按钮后，再选择选择Preserve ATI OVERDRIVE SETTING，VPU恢复失效的问题

CrossFire™: Enabling Wait for Vsync within the Catalyst® Control Center no longer results in display corruption being noticed within the 3D->Anti-aliasing aspect page when setting the pre-view to full-screen：交火 ：在设定为全屏预览 时， 在控制中心3D--抗锯齿页面启用Wait For Vsync会导致黑屏。