sli主板插两块不一样的显卡会如何？

阿亚纳梅

sli主板插两块不一样的显卡会如何？

也就是说，插块ATi的，然后再插块NV的，会怎么样啊？一直很好奇会出现什么情况w00t)

FFF3

地球爆炸了~~~~~~~

sharptime

SLI失败

还能咋样

GTO014

看看冒烟没 :funk:

somersby

可以分别跑3D，不能同时跑3D

lcdg

SCF诞生了
:lol: :lol:

InuYasha

通常情况下装完A卡的驱动就会重启

天之福音

:lol: 电脑报废了

somersby

NVIDIA's Double Graphics Whopper: SLI Comes to Market
Lars Weinand
November 23, 2004 12:00


ATI X800 And GeForce 6800 Simultaneously



And lastly, one final test we just couldn't say no to. Even back in the days of Voodoo2, users had a choice of whether they would rather play 3D games via graphics card or a separate Voodoo2 card. So why not deploy a Radeon X800 XT PE alongside a GeForce 6800 Ultra (besides the price of course) and connect the cards to a monitor with two display inputs? Here's how you do it:





Installing the ATI Catalyst v4.11 driver alongside NVIDIA's v66.93 is no problem. After restart, the ATI driver returns an error message because the second display has not yet been activated. When this is corrected in the Windows Display menu the ATI driver options can also be accessed.



ATI and NVIDIA united together in harmony - at least inside the computer.


Now both ATi and NVIDIA icons are found in the taskbar.
On the first card, the GeForce 6800, the games run without problem. After switching over the primary display to the ATi X800 however we get a D3D error message when starting up a game. Restarting is no help either.

Changing out the cards, putting the X800 in the upper slot, does not work out well at all. After re-recognizing the graphics cards and rebooting, the driver for the GeForce 6800 does not load correctly even though the card is still shown as being installed in the Device Manager.

But we are not ones to give up so easily! So back to configuring the GeForce 6800 Ultra in slot 1 and X800 XT in slot 2. Again we designated the X800 as a primary monitor. In addition we switched the GeForce 6800 display off by deactivating "Extend my Windows Desktop onto this Monitor". Restart and voilà: all 3D games now run on the X800! It works!

Here is how we proceeded step by step. First only the GeForce 6800 Ultra is activated. Both NVIDIA and the ATI driver are installed as described above.

In the Windows Display Manager the Radeon X800 XT is deactivated (display 2)


After clicking on the display 2, first select the option "Extend my desktop onto this monitor", then the option "Use this device as the primary monitor" and hit "Apply". Now switch over the monitor to the second VGA input.


Now use the mouse to select display 1 and deactivate the display via the option "Extend my desktop onto this monitor".


After clicking "Apply" the GeForce 6800 turns itself off.





Starting a 3D application returns another error message, so - restart!
Now the PC boots up ... at first the screen remains black but that is normal, as all boot messages etc. are delivered on the first card (the GF 6800) and our monitor input is switched to the X800. After loading Windows the display appears and the GeForce 6800 turns itself off.



After restart: start up 3D Mark 2005 and - voilà!!
Switching back to the GeForce 6800 is done the same way. But at first the GF 6800 only runs in 4-bit color depth! Don't let this bother you. After restarting the computer you can reset the desired resolution and color depth.





Conclusion: it is anything but convenient and requires computer restarts, but it works: your choice of gaming with either an ATI or NVIDIA card on a single computer! And you don't need to have the most expensive models.