◆◆◆8800和931BW不兼容的问题已得到解决◆◆◆

DarthMaul1204

当初买回来，那画面可是模糊得要死
显卡1440x900但是显示器却是1280x1024新的驱动却不能解决

目前，只有两种方法可解决（推荐第二种）

第一种（最简单）：换VGA线，但是画质就要牺牲了，而且还要不时地调整屏幕位置，不推荐

第二种，网上找来的
I just popped in my new 8800GTX and realized that my monitor was running at 1280x1024 instead of 1440x900. Nothing I could do with the driver settings would change the very blurry image quality. I didn't want to use the vga adapter, so I did a little searching and found this:

1. NVIDIA Control Panel > Display > Manage custom timings.
2. Click both "Treat as HDTV" and "Allow modes not exposed by the display"
3. Click [Create...]
4. Under Custom display mode values:
Horizontal desktop pixels: 1440
Vertical desktop lines: 900
GDI Refresh rate: 60
Bits per pixel: 32
(don't have "Interlaced" checked)
5. Click [Advanced >>] (by the way this is where I didn't go when NVIDIA emailed me)
6. Under "Back-end parameters":
Timing standard: DMT
Desired refresh rate: 60
(the rest of the fields are grayed out)
7. Under "Front-end paramers"
Scaling type: Display (none)
8. Click [Test]
9. Click [OK]

Thankfully that worked. I was afraid I had gotten a bad apple!
英文简单易懂，懒得翻译了，不懂跟贴问

akcadia

:funk: :funk: :funk:

貌似三个月前TRY就有人教过这个方法了吧```

harleylg

原帖由 DarthMaul1204 于 2007-5-3 18:22 发表
当初买回来，那画面可是模糊得要死
显卡1440x900但是显示器却是1280x1024新的驱动却不能解决

目前，只有两种方法可解决（推荐第二种）

第一种（最简单）：换VGA线，但是画质就要牺牲了，而且还要不时地调 ...

88GTS/GTX，当然是用DVI-VGA转接线（不是转接头）才是王道啊，哪来的牺牲画质？

emufan

自定义计时么，玩儿电视的倍儿熟悉都～～～～ATI的卡可以用powerstrip