INQ：所有的AMD R6XX家族芯片都将是65nm

Edison

CeBIT 007 That silicon respin was a die shrink


By Theo Valich in Hanover: 星期五 16 三月 2007, 18:56

WHEN YOURS TRULY learned of a new respin of the chip in early January, we learned that this respin was caused by one fact, and one fact only.
The 80 nanometre chip was bleeding current like a slaughtered pig bleeds blood as said quadruped heads to the Munchner Halle to be served up as a sausage or two. Squealing.

However, we did not know then that AMD did not order just a respin, but the company got an attack of bravery, didn't take the R520/R580 route, and scrapped the R600 altogether. Things change.

The 80nm R600 die - as it was leaked - will now come to life only in a very limited amount of chips, since AMD decided to solve its problems by pulling all resources to go 65 nano across the board, including this 720 million trannie heavy monster. This drastically reduces power consumption and lets AMD clock the R600 to 1GHz or even more. The mass production R600 will be made on a 65 nanometre process.

That means that even though AMD is more than six months behind in terms of the G80 vs. R600 battle, AMD actually now has a six month levy over the NV55, better known to people as ex-G81, currently known about as G90 - or the NV55 in the halls of Satan Clara.

We have talked with several high-ranking AMD executives and confirmed this rumour. So, from March 16th at 19:59 CET - the R600 which you will buy in stores in May will be 65nm, and will consume almost one third less power than the 80 nanometre one. µ

:blink: :) 好消息亚。

phk

http://we.pcinlife.com/thread-732269-1-1.html

我的预言真准嘿哈哈哈哈

[ 本帖最后由 phk 于 2007-3-17 16:55 编辑 ]

phk

原帖由 happypunisher 于 2007-3-17 16:52 发表

貌似没见过什么预言:loveliness:

我题目写明《我来预言》，不过由于论坛更新编号，所以没了:p

phk

3W块成为核心废料，真不环保嘿哈哈哈哈

JCNvidia

那80NM的价格会不会更便宜?

saintangel

原帖由 AlcatrazX 于 2007-3-17 17:34 发表
CeBIT 007  重新流片是为了减小芯片面积
By Theo Valich in Hanover: 星期五 16 三月 2007, 18:56

     当人们在一月初得知r600将要重新流片的时候，我们知道这仅仅是有一个原因造成的。
     80nm的r600芯 ...

amd这个田忌赛马的如意算盘可真是响啊
R600比G90早6个月？？？如果R600在今年6月才能大量上市，而G90年底发布
性能上R600将会体无完肤啊~

hitmanu

无所谓nfan和afan,应景应时买你需要的东西不就结了.

HeavenPR

The 80 nanometre chip was bleeding current like a slaughtered pig bleeds blood

这句话应该是 80nm 芯片的漏电之大，像一只被宰的猪喷的血一样咕嘟咕嘟的.... :lol:

aibo

对ati的roadmap很不解

按照现在的说法，到了5/6月份就能搞定65nm的R600的话，为什么还要花大力气搞3月份发布的80nm的R600？

SaviouR

漏电问题，呵，这是个好借口啊:whistling:

Edison

有多种理由可以让厂商推迟产品发布。

1、初产产品存在上市后无法克服的bug。
2、成本过高或者产量上不去。
3、库存太多，无法在短期内倾倒完。
4、软件配合不上，不过这个一般是最不成理由的理由，例如R300在DX9发布前三个多月就推出了。

SaviouR

cho你知道AMD全面换65nm的真正主要原因的吧B)

80nm的良率.......AIB手里的屯货......

漏电根本不是什么大的问题......

其他借口，比漏电还不可信.....


算了，还是不多嘴了，匿下.....:a)

gamekiller

原帖由 AlcatrazX 于 2007-3-17 17:34 发表
CeBIT 007  重新流片是为了减小芯片面积
By Theo Valich in Hanover: 星期五 16 三月 2007, 18:56

     当人们在一月初得知r600将要重新流片的时候，我们知道这仅仅是有一个原因造成的。
     80nm的r600芯 ...

其中有这么一句话：

  我们已经与多位amd的高层人员交谈过并确认了这传言。因此，从欧洲中部时间三月十六日19点59分开始——五月份在商店能够买到的r600将会是65nm的，并且功耗将比80nm的小三分之一。


三月十六日就有R600卖吗？

mooncocoon

http://news.mydrivers.com/1/79/79647.htm

驱动之家的,注意最后