|
本帖最后由 per1-q1222 于 2012-2-7 12:18 编辑
適用於:
CC Pro 2.0, CVPM以及High port count MR controller使用者
其他使用標準型板卡者, 請用90版...
請各位務必更新....
Download:
http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/12.12.0-0091_SAS_2108_Merged_FW_Image_APP-2.130.243-1483%20(2).zip
Component:
=========
SAS MegaRAID Firmware Release for MegaRAID Controllers
Release date: 01/30/2012
Version Numbers:
===============
Current Firmware Package (with CacheCade Pro 2.0): 12.12.0-0091
Current Package Details:
APP-2.130.243-1483_BB-2.02.00.00-0000_BIOS-3.24.00_4.12.05.00_0x05120000_WEBBIOS-6.0-42-e_37-Rel_PCLI-04.04-01900008_BOOT-09.250.01.219_NVDATA-2.09.03-0029_SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00_2012_01_07
Previous Firmware Package (2108 with CacheCade Pro 2.0) : 12.12.0-0077
Previous Package Details:
APP-2.130.163-1437_BB-2.02.00.00-0000_BIOS-3.22.00_4.11.05.00_0x05060000_HII-_WEBBIOS-6.0-42-e_37-Rel_PCLI-04.04-01800008_BOOT-09.250.01.219_NVDATA-2.09.03-0026_2011_11_01
Previous Firmware Package (High-Port-Count controllers with CacheCade Pro 2.0): 12.12.0-0080
Previous Package Details:
APP-2.130.163-1437_BB-2.02.00.00-0000_BIOS-3.22.00_4.11.05.00_0x05060000_WEBBIOS-6.0-42-e_37-Rel_PCLI-04.04-01800008_BOOT-09.250.01.219_NVDATA-2.09.03-0026_SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00_2011_11_10
Previous Firmware Package (High-Port-Count controllers without CacheCade Pro 2.0): 12.12.0-0074
Previous Package Details:
APP-2.120.183-1415_BB-2.02.00.00-0000_BIOS-3.23.00_4.11.05.00_0x05080000_WEBBIOS-6.0-45-e_40-Rel_PCLI-04.04-01800008_BOOT-09.250.01.219_NVDATA-2.09.03-0024_SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00_2011_10_06
Bug Fixes and Enhancements:
===========================
Firmware:
=========
LSIP200209948 (CO) Generally available support of selected battery modes for iBBU08.
LSIP200199484 (CO) Enable copy back on SMART - Liberator
LSIP200151375 (CO) Need StopOnError functionality when SafeStore passphrase is enabled
LSIP200199858 (CO) add display of ibbu communication retry counter in fw log
LSIP200188345 (DFCT) (CL LSIP200185468) extended retries of write verify command causes driver timeout
LSIP200211360 (DFCT) (CL LSIP200209847) Pulling VD 0 from an R60 and rebooting, 2 foreign configs when array 0
LSIP200199863 (DFCT) UnconfigGood PD fails to kick in as EHS (Emergency Hot Spare)
LSIP200212811 (DFCT) Advanced features key have to be re-entered
LSIP200050209 (DFCT) DATA TLB error exception in case of manual removal/insertion of drives.
LSIP200051385 (DFCT) R1 rebuild hangs at 50% mark after CC is run
LSIP200051392 (DFCT) Fw broke into MegaMon while writing a test file to a VD (R6) from a non MR disk.
LSIP200221925 (DFCT) SATA workaround handles LBA incorrectly for 6-byte read CDB
LSIP200186584 (DFCT) Logical Unit ID (VPD page 0x83) changed after foreign import
LSIP200198521 (DFCT) P16 set properties command fails
LSIP200212818 (DFCT) Port forward LSIP200211068 to main stream liberator maintenance
LSIP200212644 (DFCT) Sepaton noticed additional fan speed event messages every 2 minutes
LSIP200186884 (DFCT) DelaySOD is not working on customer Liberator boards
LSIP200150532 (DFCT) Liberator FW cause system (sles11sp1/rhel6) reset while lspci -vvx
LSIP200188226 (DFCT) can't sustain at least 950 MBps performance with Cache Flush setting 1 sec
LSIP200200459 (DFCT) MegaCli prematurely returns exit 0x0 status on drive firmware flash
LSIP200209349 (DFCT) Enable PCI capability Bit for VPD exsupport.
LSIP200198466 (DFCT) wrong slot # reported by megaraid compared to physical slot for EG disk
LSIP200199687 (DFCT) ?on-Transparent� learns seen with Mode 3
LSIP200210349 (DFCT) BBUmode incorrectly set
LSIP200210823 (DFCT) No data is copied to target array after more than 15 secs
LSIP200212264 (DFCT) Multibit ECC error with customer Liberator MR board and vmware ESXi5.0
LSIP200199735 (DFCT) LSI Mega RAID SAS-MFI BIOS Register state 0xF0010002
LSIP200211484 (DFCT) MR bios show "adapter at baseport is not responding" intermittence
LSIP200186966 (DFCT) configuration becomes foreign after fw fails 3-4 attempts to access raid key during boot
LSIP200210596 (DFCT) too many messages in fw log "ArDiskTypeMisMatch : SAS_SATA_MIXING_VIOLATION�
LSIP200155948 (DFCT) FW seems to incorrectly mark ibbu's SOH bad (iBBU07, ibbu05, ibbu01)
LSIP200209279 (DFCT) additional reboot required after updating ibbu FCC to design capacity
LSIP200210505 (DFCT) OEM requests qty of prints to be reduced in fw log for ibbu i2c communication retries
LSIP200212471 (DFCT) FW automatically starts learn cycles on ibbu08 every reboot
LSIP200211810 (DFCT) Battery failed message during learn cycle
LSIP200212311 (DFCT) Battery failed message during learn cycle
LSIP200199812 (DFCT) Alarm sounds with online VD's after flashing latest 10M09 Patch 16 firmware (2.120.163-1343)
LSIP200199961 (DFCT) LDBBM entries are incorrect after foreign import
LSIP200186336 (DFCT) Controller does not work with pci set to nomsi in kdump kernel
LSIP200209455 (DFCT) Potential data integrity issue while running the IO on degraded R5 VDs with 32 drives.
LSIP200200117 (DFCT) unexpected Power State Change events occur
LSIP200185441 (DFCT) Disk performance disparity between WB controller cache on and off on system disks
LSIP200210751 (DFCT) Patrol Read fails on R1 with around 2000 double medium errors
LSIP200210768 (DFCT) Enabling security causes the config to be missing, and a configured FDE array to be seen as foreign on reboot.
LSIP200209385 (DFCT) Intermittent RAID key failure during power-on
LSIP200209329 (DFCT) FoD features will not activate or deactivate
LSIP200199416 (DFCT) Change BBU-08 support Firmware Mode5 WB capacity from 960mAh to 674mAh for low power DDR-2
LSIP200199331 (DFCT) Older ibbu batteries display 65K capacity and are marked SOH bad
LSIP200199335 (DFCT) Request FW to not mark ibbu battery as bad when very high capacity is detected
LSIP200196885 (DFCT) Batteries Not Charging properly on OEM controller
LSIP200209376 (DFCT) OEM requests ibbu i2c communication retries to be displayed in fw log
Webbios:
========
None
BIOS:
========
LSIP200199737 (DFCT) server System posts 'R00' as 'R0' during the reboot
LSIP200199163 (DFCT) Legacy BIOS BBS Boot Issues
LSIP200196810 (DFCT): SWR-Macon: After installing the OS, unable to boot from SCU VD
LSIP200199602 (DFCT): FW hangs during POST after flashing new BIOS
LSIP200018807 (DFCT): BIOS sees extra characters "0%" at end of particular product name
LSIP200156493 (DFCT): There is no space between FW version and capacity in the table where Adp/VD/PD info is displayed
Numerous UEFI and HII updates
NVDATA:
=======
Numerous NVDATA changes
Installation:
=============
Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download
section of www.lsi.com.
Command syntax: MegaCli -adpfwflash -f mrCCP2.rom -a0
|
|